24
3 . I N S T A L L A T I O N
C o n n e c t i n g a P C B e h i n d t h e I P P h o n e
Connecting a PC Behind the IP Phone
•
Plug one end of the CAT-5 or better cable to the Ethernet connector on the PC.
•
Plug the other end of the same cable to the port marked LAN on the IP phone.
•
It is recommended to establish VLANs to ensure Quality of Service. For more information on how to
set up VLANs, see the PoLRE Switch User Guide.
Note
: Data speeds are 10 Mb/s Full Duplex.
Connecting to the 2-wire Network Infrastructure
Note
: Use a standard RJ21 telco cable to connect the 2-wire network infrastructure to one of the
downlink ports on the front panel of the PoLRE switch. The total cable length of the network
infrastructure (from PoLRE switch to Phylink adapter) can be up to 1200’ (365m).
