Z- axis Calibration
Z-axis calibration is essential for every 3D printer. Run this test to make sure that the
building plate is leveled to the LCD screen. This is to ensure that models and prints
will adhere to the building plate.
SONIC 4K
Step 1:
Remove the Resin Vat
Make sure to remove any objects present on the machine's platform.
Step 2:
Prepare a piece of A4 paper and lay it flat on the LCD. This piece of paper will be
used for leveling the building plate.
Step 3:
Use a wrench to loosen all 4 screws present on the sides of the building plate. After
loosening it, make sure to double-check to see if the plate is loose and movable.
