Photron Revision 1.03E User Manual Download

Page: 75 / 93

4.4. Other Detailed Settings

4.4.1. Setting the Date/Time

This option sets the high-speed camera's internal clock. Set the date and time so it can be added

as data to the recorded image. Once the date/time is set, the values are saved even when the

system power is turned off.

①

Press the remote controller's MENU key to display the menu list.

②

Select TIME SET from the OTHERS submenu with the remote controller's ARROW keys and press
the ENTER key.

③

The TIME SET settings are displayed on the left of the screen.

④

You can move to the item with the

←→

keys and change the setting's value with the

↑↓

keys.

⑤

When all the settings are complete, press the ENTER key to finish.

↑

Increase/

Decrease

Value

↓

←Move Item→

TIME SET

DATE 00-01-01 (year-month-day format)

▲

TIME 00:00:00 (hour:minute:second format)

Remote Controller User’s Manual

Summary of Contents for Revision 1.03E






























































































Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands

Photron Revision 1.03E, User Manual

Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands