Photron FASTCAM SA7, Hardware Manual

Page: 67 / 87

53 FASTCAM SA8 Hardware Manual
5.1.2. General Specifications
Environment Conditions
Strage Temperature
-20
℃ ～
60
℃
(No Condensation)
Strage Humidity Below 85% (No Condensation)
Guaranteed Operating
Temperature
0
～
40
℃
(No Condensation)
Guaranteed Operating Humidity Below 85% (No Condensation)
Pollution degree Degree 2 according to IEC60664-1
Overvoltage category Category II according to IEC60664-1
Maximum use altitude 2,000m or lower
Dimensions
Camera Body 151 (H) × 102 (W) × 195 (D) mm excluding protrusions
Memory Battery 151 (H) × 138 (W) × 195 (D) mm excluding protrusions
DC Power Supply
Power Supply Voltage
22V
～
32V
Power Consumption 65VA
Weight
Camera Body 3.9kg
Memory Battery 4.7kg
Photron has verified two types of AC cables, type A (standard for Japan, USA, Canada, etc.)
and type SE (standard for Germany, France, etc.). However, when those cables cannot properly
receive power when plugged in, use the proper AC cable for the region's standards and verify
that AC cable works properly.
For inquires regarding the recommended AC cable for each region, contact that region's
Photron branch office or the distributor.
5.1.3. AC / DC Adaptor
Manufacurer FSP Group Inc. (Brand Name : PROTEK)
Type PMP150-14-K20
Rating
Input AC100-240V , 47-63Hz , 1.63-0.7A
Output DC24V , 6.25A
Dimensions
49.7 (H)
×
82 (W)
×
207.6 (D) mm excluding protrusions
Weight 970g