Photron FASTCAM Mini WX100, Hardware Manual

Page: 70 / 100

Chapter. 3
Functions
•
An accurate frequency is output, but when SYNC OUT TIMES is set to a large value with a high
frame rate, the setting may result in frequency errors.
•
There are following limitations in SYNC OUT TIMES function(-67,500fps for WX50)
Frame Rate Restriction
50fps - 60,000fps No Limit
60,001fps - 80,000fps x30 is unavailable
3.19.
Event Marker Function
With the system, it is possible to input an external signal during recording, at the instant the frame
number is stored, and during playback you can immediately access, or jump to, the stored frame
numbers (event markers). This a separate feature from the trigger point, by marking interesting
points during recording, these points can be easily called up for review during playback. The event
marker can store ten positions within a sequence.
The frame number recording occurs on the pulse's edge, and the next frame after the pulse's edge is
input is stored as the event marker. Event marker settings can be made with PFV.
58