Photron FASTCAM Mini WX100, Hardware Manual

Page: 52 / 100

Chapter. 3
Functions
3.8.
LOW LIGHT Mode
The more you increase the frame rate or shutter speed of the camera, the more the amount of light
entering the camera decreases, making the displayed image darker. Low light mode is a function that
temporarily increases the exposure time, making the displayed image easier to see to enable you to
focus and setup the camera.
The default shutter speed of this product is 1/50 second.
3.9.
VARIABLE Setting
In the recording conditions settings, the frame rate and resolution can be set to the desired value
following the conditions listed below.

FRAMERATE can be set between 50 fps and 80,000 fps. ( between 50 fps and 67,500 fps for
WX50)

The size and horizontal position of the resolution can be set in 256 (horizontal) and 32(vertical)
increments.

The minimum resolution is 256 (horizontal) and 32 (vertical).
•
Please refer to “3.3 Setting and Registering the Frame Rate/Resolution” of “Photron FASTCAM
Viewer User’s Manual” for the details of the setup.
•
The area cannot be moved to the vertical/horizontal direction at the variable setting of the system.
40