Photron Fastcam MC1, Hardware Manual

Page: 98 / 141

Chapter 4. Playback
96
4.1. Video Playback
The FASTCAM MC1 can immediately playback images recorded to memory on a connected
video monitor or on the keypad’s LCD screen. This procedure is explained here.
1. Switch from LIVE to MEMORY mode. If the camera is in LIVE mode, press the keypad’s
LIVE key to switch to playback (memory) mode. The LIVE key LED will turn off.
On the screen:
2. Press the PLAY key on the keypad to start playback of the recorded images.
3. The playback speed can be changed with the ARROW
←→
keys on the keypad. The
current playback speed is displayed in the upper part of the screen.
←
slow fast
→
PAL Output Playback Rate 2, 4, 8, 12, 25 fps
NTSC Output Playback Rate 2, 5, 10, 15, 30 fps
Name Function Content
REV Reverse
Playback
Reverse playback of the recorded images at a speed of 2-30 frames/sec (NTSC),
2-25 frames/sec (PAL).
PLAY Playback Forward playback of the recorded images at a speed of 2-30 frames/sec (NTSC),
2-25 frames/sec (PAL).
PAUSE Pause Pause playback. The || mark will display in the upper portion of the video output
screen. Frame advance can be performed by pressing the PLAY/REV key.
STOP Stop Stop playback and return to the trigger frame.
FR Fast-reverse playback of the recorded images at x10, x100, x1000 the current
speed.
FF Fast-forward playback of the recorded images at x10, x100, x1000 the current
speed.
Fast-Reverse
Fast-Forward