Chapter 3. Recording
48
3.4.2. CENTER Mode
CENTER
mode is a trigger mode where equal content is recorded before and after the trigger is
input is saved to memory equally. This mode is suitable for viewing before and after an important
instant. For example, in a situation with a maximum useable memory for two seconds of recording,
the
REC
key is pressed as shown in the diagram below, and one second before and one second
after the trigger was received for a total of two seconds of high-speed video.
・
Recording in CENTER Mode
The procedure for recording in
CENTER
mode is explained next.
1. Following the directions in “
3.4. Selecting the Trigger Mode
”, verify that the camera mode
is in
LIVE
mode and the trigger mode is
CENTER
.
2. Press the
REC READY
key on the keypad. The system enters the recording ready state.
Verify that the
LIVE
display in the top of the screen has changed to
READY
.
Summary of Contents for Fastcam MC1
