Photron Fastcam MC1, Hardware Manual

Page: 18 / 141

Chapter 2. Setup
16
2.2. Part Names
The FASTCAM MC1 is composed of multiple components which include the camera controller,
imager, AC adapter, and the control software “ Photron FASTCAM Viewer ” (referred to below as
PFV ).
For each of the FASTCAM MC1 components:
・
Do not use in an area with flammable gas or dust present.
・
Do not place in an unstable location such as on a wobbly platform or an incline.
・
Do not disassemble or modify.
・
Do not expose to liquids such as water.
・
Do not use in a manner with excessive force.
2.2.1. Camera Controller
Two different models are available depending on the memory capasity - Model 1 with 1GB
memory and Model 2 with 2 GB. The models are further divided by the maximum frame speed -
Model (500) with maximum frame speed of 500 fps, Model (2K) 2,000 fps and Model (10K) 10,000
fps. They contain IC memory for saving images, and they have been designed with the capability to
save high-speed images as uncompressed digital data. The camera controller has a video output
connector to display live and recorded images on a video monitor, a Gigabit Ether interface to
connect a PC to fully control the cameras or download data, and various I/O (input/output)
connectors for external synchronization/trigger signals.
Camera Controller Exterior