11
TacFusion
User Manual A1
2.
Device Operation
2.1.
Device Charging
Purpose:
For the first use, it is advised to charge the batteries with your charger until they are fully charged.
Steps:
1. Take the proper plug adapter.
2. Push and hold it, at the mean time slide it toward the inside to assemble the power adapter.
Figure 5. Step 1 and 2.
3. Connect the power adapter to the battery charger.
Figure 6. Step 3.
4. Insert the batteries in the charger with the correct positive/negative terminals position.
Note:
When the charger is powered on, the LCD display lights up, indicating the status of the batteries. The charger will
detect the battery and charge them.
Summary of Contents for TacFusion
Page 1: ...TacFusion User Manual A1 ...
