Photon Focus MV1-R1280-50 Series, User Manual, Page: 37 / 103

5.2 Trigger and Strobe
Figure 5.4: Trigger Inputs - Multiple GigE solution
The ContinuousRecording and ContinousReadout modes can be used if more than
one camera is connected to the same network and need to shoot images si-
multaneously. If all cameras are set to Continuous mode, then all will send the
packets at same time resulting in network congestion. A better way would be to
set the cameras in
ContinuousRecording mode and save the images in the memory
of the IPEngine. The images can then be claimed with ContinousReadout from one
camera at a time avoid network collisions and congestion.
.
MAN066 12/2018 V1.1 37 of 103