Photon Focus MV1-R1280-50 Series, User Manual, Page: 27 / 103

4
Product Specification
4.1 Introduction
The Photonfocus MV1-R1280 GigE camera is built around an ultra-low noise CMOS image
sensor with a high dynamic range. The camera is targeted at demanding ultra-low light
scientific applications and high-end night vision systems.
The principal advantages are:
• Resolution of 1280x1024 pixels
• Optimized for ultra-low light conditions
• Very low noise of less than 1 e
−
• Output greyscale resolution of up to 16 bit; internal resolution of 18 bit.
• Spectral range: 350 - 930 nm
• Rolling Shutter
• Gigabit Ethernet interface, GigE Vision and GenICam compliant
• Frame rate: 33 fps at full resolution
• Advanced I/O capabilities: 2 isolated trigger inputs, 2 differential isolated RS-422 inputs
and 2 isolated outputs.
• Crosshairs overlay on the image
• Image information and camera settings inside the image (status line)
• Software provided for setting and storage of camera parameters
• The rugged housing at a compact size of 55 x 55 x 57 mm
3
makes the Photonfocus
MV1-R1280 GigE camera series the perfect solution for applications in which space is at a
premium.
• Programmable Logic Controller (PLC) for powerful operations on input and output signals.
• A/B RS-422 shaft encoder interface
• Wide power input range from 12 V (-10 %) to 24V (+10 %).
The general specification and features of the camera are listed in the following sections.
MAN066 12/2018 V1.1 27 of 103