Photon Focus MV1-D2048-3D03 Series, User Manual, Page: 80 / 131

5 Functionality
Status bits Parameter Description
STAT[23:0] IMG_CNT[23:0] Image counter (see also Section 5.10.1)
STAT[63:32] RT_CNT[31:0] Real time counter (time stamp) (see also
Section 5.10.1)
STAT[87:64] ENC_POS[23:0] Encoder position (see also Section 5.4.9)
STAT[103:96] M_TRIG[7:0] Missed trigger counter (see also Section 5.10.1)
STAT[135:128] M_BURST_TRIG[7:0] Missed burst trigger counter (see also Section
5.10.1)
STAT[167:160] M_FC_TRIG[7:0] Missed FrameCombine trigger counter (see also
Section 5.10.1)
STAT[195:192] M_TRIG_LEVEL[3:0] Trigger Level: signal level of the trigger input
signal (only available in some models, see
Appendix B). Bit 0: PLC_Q4: Bit 1: Line1; Bit 2:
PLC_Q6 (A-Trigger); Bit 3: PLC_Q7 (B-Trigger).
STAT[224] MOV_ROI_COL_WARN Applies to moving ROI only (see Section 5.2.16):
value 0: there are more columns with a
detected laser line than specified in
Peak0_MovingROIMinCol . Value 1: there are less
columns with a detected laser line than
specified in
Peak0_MovingROIMinCol .
STAT[225] MOV_ROI_BORDER Applies to moving ROI only: value 1: the
distance from the mimimum or maximum
coordinate to the corresponding image border
is less than specified by
Peak0_MovingROIMinDistance . This is an indication
that perhaps the height of 3D-ROI is too small
for the current situation.
STAT[226] MOV_ROI_LASER_FINDER Applies to moving ROI only: value 1: the
current frame is a laser finder window.
STAT[238:228] PEAK0_ROI_Y Vertical starting position of current 3D ROI of
peak 0. This information might be useful for
moving ROI.
STAT[266:256] MOV_ROI_MIN_POS Applies to moving ROI only: minimal position
of laser line in current image.
STAT[282:272] MOV_ROI_MAX_POS Applies to moving ROI only: maximal position
of laser line in current image.
Table 5.11: Status fields
80 of 131 MAN052 12/2018 V3.2