Photon Focus MV1-D2048-3D03 Series, User Manual, Page: 105 / 131

7.3 Pleora SDK
7.2.6 Get feature list of camera
A list of all features of the Photonfocus GigE cameras in HTML format can be found in the
GenICam_Feature_Lists sub-directory (in Start -> All Programs -> Photonfocus -> GigE_Tools ).
Alternatively, the feature list of the connected camera can be retrieved with the PF_GEVPlayer
(
Tools -> Save Camera Features as HTML... ).
7.3 Pleora SDK
The eBUS package provides the PureGEV C++ SDK for image acquisition and the setting of
properties. A help file is installed in the Pleora installation directory, e.g.
C:\Program
Files\Pleora Technologies Inc\eBUS SDK\Documentation .
Various code samples are installed in the installation directory, e.g. C:\Program Files\Pleora
Technologies Inc\eBUS SDK\Samples . The sample PvPipelineSample is recommended to start with.
Samples that show how to set device properties are included in the PFInstaller that can be
downloaded from the Photonfocus webpage.
7.4 Frequently used properties
The following list shows some frequently used properties that are available in the Beginner
mode. The category name is given in parenthesis.
Width (ImageFormatControl) Width of the camera image ROI (region of interest)
Height (ImageFormatControl) Width of the camera image ROI
OffsetX, OffsetY (ImageFormatControl) Start of the camera image ROI
ExposureTime (AcquisitionControl) Exposure time in microseconds
TriggerMode (AcquisitionControl)
External triggered mode
TriggerSource (AcquisitionControl)
Trigger source if external triggered mode is selected
Header_Serial (Info / CameraInfo) Serial number of the camera
UserSetSave (UserSetControl) Saves the current camera settings to non-volatile flash memory.
7.5 Height setting
The
Height
property must be set manually to the value of
HeightInterface
whenever a property
relevant to the height setting is modified (an example for this can be found in Section 7.6). The
height relevant properties are:
• PeakDetector_NrOfPeaks
• PeakDetector_Mode
• Peak0_3DH
• Peak1_3DH
• FrameCombine
The height can be directly written to the Height property in 2Donly mode.
MAN052 12/2018 V3.2 105 of 131