7. Maintenance
• Empty the liquid out of your Photocentric wash
unit after either a month of usage, or when it
is no longer cleaning your parts properly, the
specific option will depend on how frequently
the machine is in use. To empty the liquid,
disconnect all power supplies and carefully
place the out valve (as seen in the below
diagram) over a bottle or container. Once
positioned turn the valve to release all the
Photocentric Cleaner from inside your wash
unit. This bottle or container needs to then be
sealed and disposed of following your local
regulations and guidelines and Cleaner Safety
Data Sheet.
• Do not cover the vents of the wash unit.
• Do not operate the machine without
Photocentric cleaner inside.
• It is advised to operate the machine with the lid
securely wash unit.
• Do not use alcohol, gasoline, or flammable
solutions. Doing so could cause a fire or
explosion and will void the warranty of your
machine.
• Do not use mineral acids as these could
damage your tank.
• Do not touch the tank or cleaning solution
during use.
• Do not allow temperatures to exceed 70
degrees centigrade.
• Do not place your fingers or hands into the tank
whilst the cleaner is operating. Doing so may
cause discomfort and possible skin irritation.
• Avoid skin contact with solutions and provide
adequate ventilation if necessary.
• Do not use solutions containing chlorine
bleach.
• Use a low power air compressor to clean dust
from the control system regularly.
• Once a month on emptying the cleaner out
of your wash unit we also advise cleaning the
inside of the ultrasonic, please do this whilst
the machine is turned off, empty and not
connected to the power.
• To prevent damage to the wash unit do not
replace the cleaning solution more frequently
than is needed.
