Phonak Roger iN, Installation Manual

Page: 1 / 3

Roger iN microphone installation guide
Contents
Installing Roger receivers into a pair of hearing devices with RogerDirect™ ............................................................................................. 1
Checking number of Roger receivers in a Roger iN microphone .................................................................................................................... 2
Uninstalling Roger receiver from a hearing device ............................................................................................................................................ 3
Installing Roger receivers into a pair of hearing devices with RogerDirect ™
Make sure the hearing instrument contains the latest FW that is available in Phonak Target 6.1 or higher.
Installation steps:
1. Switch on the Roger iN microphone
2. Press and hold the install button for two seconds until the indicator light starts to blink green:
Roger Select ™ iN Roger Table Mic II iN Roger Pen ™ iN
3. Place the Roger iN microphone on the table
4. Switch on one hearing device (keep other hearing devices switched off)
Phonak
Roger
™
iN microphones