School:
Roger contact:
Date:
Teacher:
Phone:
Serial number:
1. Plug Roger AudioHub into power source.
2. Hold Roger microphone within 4 inches (10 cm) of Roger
AudioHub. Press
Connect
.
3. Connect Roger AudioHub to the audio source by plugging
the audio cable into
Audio IN
on the back of the Roger
AudioHub.
If plugging in only one source, use socket #1. Plug the
other end of the cable into the audio source, such as MP3,
TV, PC, etc.
4. Press and hold the Roger AudioHub’s power button for
2 seconds. Then start the audio source signal.
5. Volume should be adjusted first on the audio source’s, and
then on the Roger AudioHub.
Roger AudioHub indicator light
Solid red
– Roger AudioHub is off
Solid blue
– Standard operation mode
Blinking blue
– Roger microphone is off or out of range
Solid green
– Microphone is muted
Green to red
– Volume is adj/–
Blinking yellow
– Software update
Blinking red
– Call your Roger Contact
Alternating red/yellow
– Cable is not correctly plugged in
www.eschooldesk.com
Connecting
Connecting Roger AudioHub
to Roger inspiro
Reference Sheet
3
5
2
4
1
V1.00/20
13-06/na ©Phonak AG All rights reserved
MAX