Phoenix RPC12 Series, Cli Reference Manual

Page: 58 / 245

Chapter 3 Command Descriptions 59
create user
Description
Creates a new user profile. When you enter the command, the system prompts you
to enter a case-sensitive password, which can include a maximum of 19 printable
ASCII characters except backslash (\), quotation mark (
" ), apostrophe ( ' ), or spaces.
The system supports 13 user profiles.
Input
create user name [level monitor|manage] [type
standard|advanced|diagnostic] [interfaces interfaces ]
Parameter Description
name
Unique name that can include a maximum of 19
alphanumeric characters. Names are case sensitive.
level
monitor|manage
Optional. Specifies whether the user has
monitor
(view-only) or
manage
(modify) access for user
interfaces. The default is
monitor
.
type
standard|advanced
|diagnostic
Optional. Specifies the user's level of technical
expertise, to control access to functionality in the WBI.
•
standard
: Enables access to standard
administrative functions. This is the default for
monitor users.
•
advanced
: Enables access to standard and
advanced functions. This is the default for manage
users.
•
diagnostic
: Enables access to standard,
advanced, and troubleshooting functions. This is the
default for users of the CLI.
interfaces
interfaces
Optional. Specifies the interfaces that the user can
access. Multiple values must be separated by a comma
with no spaces. If this parameter is omitted, the
defaults are
cli
and
wbi
.
•
cli
: Command-line interface.
•
wbi
: Web-browser interface.
•
ftp
: File transfer protocol interface.
•
none
: No interfaces.