Phoenix RPC12 Series, Cli Reference Manual

Page: 176 / 245

Chapter 3 Command Descriptions 177
show job-parameters
Description
Shows parameters for background scrub, partner firmware upgrade, and other jobs.
Input
Output
Example
Show a system's job parameters.
Related Commands
Q
“set job-parameters” on page 122
show job-parameters
Field Description
Background Scrub
Shows whether disks are automatically checked
for disk drive defects to ensure system health.
Partner Firmware Upgrade
Shows whether component firmware versions
are monitored and will be automatically
upgraded on the partner controller.
Utility Priority
Priority at which jobs (such as vdisk
verification and reconstruction but not
background scrub) run with respect to I/O
operations competing for the system's
processors:
High
,
Medium
, or
Low
.
#
show job parameters
Job Parameters
--------------
Background Scrub : Enabled
Parter Firmware Upgrade: Disabled
Utility Priority : Low