Phoenix RPC12 Series, Cli Reference Manual

Page: 161 / 245

162 Phoenix RPC12 Series CLI Reference Manual • September 2008
show events
Description
Shows events for an enclosure, including events from each management controller
and each storage controller. A separate set of event numbers is maintained for each
controller module. Each event number is prefixed with a letter identifying the
controller module that logged the event.
Events are listed from newest to oldest, based on a timestamp with one-second
granularity; therefore the event log sequence matches the actual event sequence
within about one second.
If SNMP is configured, events can be sent to SNMP traps.
Input
To show a certain number of events:
To show events by date:
To show events by ID:
show events [last # ] [a|b|both|error]
show events [from
date
] [to
date
] [a|b|both|error]
show events [from-event
ID
] [to-event
ID
] [a|b|both|error]
Parameter Description
last #
Optional. Shows the latest specified number of events. If
this parameter is omitted, all events are shown.
from date
Optional. Shows events including and after the specified
date and time. Use the format
MMDDYYhhmmss
, where
hh
is the hour on a 24-hour clock. For example,
043006235900
represents Apr 30 2006 at 11:59:00
p.m.