6
P40 KITTY HAWK
Instruction Manual
8
5. Place the aileron servo tray / hatch into the
servo box on the bottom of the wing and drill
1,6mm pilot holes through the tray and the
servo box for each of the four mounting screws.
Secure the servo tray in place using the
mounting screws provided ( 2mm x 12mm ).
6. Repeat step # 2 - # 5 to install the second
aileron servo in the opposite wing half.
6
7
INSTALLING THE CONTROL HORNS FOR
AILERON
1. One aileron control horn in positioned on each
aileron. Using a ruler and a pen, locate and
mark the location of the control horn. It should
be mounted on the bottom side of the aileron at
the leading edge, in line with the aileron
pushrod.
2. Drill two holes through the aileron using the
control horn as a guide and screw the control
horn in place.
3. Repeat step # 1 - # 2 to install the control horn
on the opposite aileron.
RIGHT
WRONG
9
10
INSTALLING THE CONTROL HORNS for flap
Repeat step #1 - #3 from installing the control
horn for aileron to install the control horn for
flap.
