1/C FLIGHT GUI DELI N ES
When ready to fly, first extend the
transmitter aerial.
Switch on the transmitter.
Switch on the receiver.
Check that the wings are correctly
fitted to the fuselage.
DOWN
UP
Operate the control sticks o n the
transmitter and check that the control
surfaces move freely and in the
CORRECT directions.
Check that the transmitter batteries
have adequate power.
ALWAYS take off into the wind.
If the model does not respond correctly
to the controls, land it as soon as
possible and correct the fault.
ALWAYS land the model INTO the
wind, this ensures that the model lands
at the slowest possible speed.
Switch off the receiver.
Switch off the transmitter.
Empty the fuel tank after flying, fuel left
in the tank can cause corrosion and
lead to engine problems.
Made in Vietnam
