MC11 Control Unit
Foreword
66650 6.0
3
Foreword
Document revision history
Version
Date
Modification, change
(-)
09/10
First release
(a)
02/11
Temperature monitoring
(b)
09/11
Mounting to the end product
(c)
07/12
Edition II
(d)
12/13
Second ratings plate
6.0
04/20
Edition III
Disclaimer and exclusion of liability
DewertOkin is not responsible for damage resulting from:
•
failure to observe these instructions,
•
changes made to this product which have not been approved by DewertOkin, or
•
the use of replacement parts which have not been approved or manufactured by DewertOkin.
Manufacturer's address
DewertOkin GmbH
Weststrasse 1
32278 Kirchlengern,
Germany
Tel: +49 (0)5223/979-0
Fax.: +49 (0)5223/75182
http://www.dewertokin.de
[email protected]
Creation of a complete operating instruction manual for the entire end product
These instructions are only intended to be used by the end-product manufacturer. They should not
be given to the operator of the end product. The factual information contained within may be used
as a basis when creating the end-product manual.
The warning and danger notices are best suited for use in the end product's manual. However, it is
not sufficient to simply follow these notices. You should also carry out an internal risk assessment
for your end product. This can then be used as the basis for the safety notices in your manual.
Usage in medical products
The MC11 control unit is not a medical product. If used in a medical end product, you (the end ma-
nufacturer) are obliged to ensure compliance with EC directives and to ensure that other pertinent
medical product regulations are maintained.
