Phoenix Mecano Dewert Okin DUOMAT 9, Installation Instructions Manual

Page: 15 / 44

DUOMAT 9 Description
79338 4.0 15
4.
Description
The DUOMAT 9 is an electrically driven unit that is responsible for adjusting the end product. The
head and foot sections of a bed can be adjusted depending on the drive options. The drive is oper-
ated by means of a controller keypad.
The different drive models vary according to their:

motor power,

number of motors,

optionally available mechanical reset function (using a rotary switch),

optionally available mechanical reset function (using a rotary switch and Bowden cable).

We reserve the right to make unannounced technical changes in the course of our continual
product improvement process!

Refer to the "Possible combinations" chapter for more details about the different configurations of
drives and controllers. Your supplier or sales agent can also provide you with more information.
4.1 Components
The main components of the DUOMAT 9 are its electric motors and the adjustment mechanism
which is enclosed under the housing and shutters. The shutters must be opened in order to mount
the drive to the end product. The brackets fastened to the end product are then inserted into these
openings. A rechargeable battery can be connected to the DUOMAT 9.
Figure 5 DUOMAT 9 (without motor cap)
A Shutters B Connections for slave drives, controller key-
pad, etc.
C Connections for special equipment (at rear
of drive) D Connection for power cord
E Snap-in locking device (for cover) F Symbol for head end of bed
G Optional UBB (floor lighting feature) H Symbol for foot end of bed
A
H
A
B
D
F
E
E
G
C