Phoenix Contact UM IA THERMOMARK X1.1, User Manual

Page: 74 / 130

THERMOMARK X1.1
1-2
PHOENIX CONTACT 103180_00_ia
1.3 FCC Approvals
The device meets the requirements of Part 15 of the FCC regulations for Class A computer
equipment. Operation of these devices may cause radio or television interference under
unfavorable conditions, which would need to be remedied by the operator using
countermeasures.
1.4 Intended Use
The THERMOMARK X1.1 is a state-of-the-art device which complies with the recognized
safety-related rules and regulations. Despite this, danger to life and limb of the user or third
parties could arise and the THERMOMARK X1.1 or other property could be damaged
while operating the device.
This is a Class A item of equipment. This equipment can cause radio interference in
residential areas, and the operator may be required to take appropriate measures.
The THERMOMARK X1.1 may only be used while in proper working order and for the
intended purpose. Users must act safely, be aware of potential dangers, and must
comply with the operating instructions. Errors, in particular those which affect safety,
must be removed immediately.
The THERMOMARK X1.1 is solely intended to print suitable media approved by the
manufacturer. Any other or additional use is not intended. The manufacturer/supplier is
not liable for damage resulting from misuse. Any misuse is at the risk of the user.
Intended use includes observing the operating instructions, including the maintenance
recommendations/instructions specified by the manufacturer.