THERMOMARK ROLLMASTER
PHOENIX CONTACT
107815_en_00
4.4
Replacing the pressure roller
Poor quality printing may result if the pressure roller is damaged or worn. In this case, you
must replace the pressure roller.
Figure 4-3
Removing and fitting the pressure roller
Removing and fitting the
pressure roller
•
To lift the printhead, turn the green lever (2) counterclockwise.
•
Remove the print media and the ink ribbon from the printer.
•
Loosen the screw on the pressure roller (3) with the supplied Allen key (1).
•
Remove the pressure roller (4) and replace it.
•
Retighten the screw.
•
Reload the print media and the ink ribbon.
If large amounts of sleeve media are to be processed, it may lead to denting in the pres-
sure roller. The pressure roller often recovers after a few hours.
We recommend using separate pressure rollers for sleeves and for labels.
–
Pressure roller, standard, TRM-PRESSURE ROLLER STANDARD, 0804655
–
Pressure roller for continuous shrink sleeve, TRM-PRESSURE ROLLER 4-50,
0804656
1
4
2
3
