Phoenix Contact THERMOMARK CARD 2.0, User Manual

Page: 14 / 46

THERMOMARK CARD 2.0
14 / 44
PHOENIX CONTACT 108770_en_01
2.3.5 Switching on the device
Figure 2-5 Switching on the printer
• Before switching on the printer, unlock the transportation safeguard (see “Unpacking”
on page 8 ).
• Switch on the printer using the mains switch on the rear of the device.
The printer runs a system test. It indicates that it is ready for operation.
2.3.6 Creating print jobs
Create the print jobs using the CLIP PROJECT or PROJECT complete marking software.
The marking software can be used to create markings on the computer that are adapted to
the Phoenix Contact marking material.
Select the THERMOMARK CARD 2.0 as the output device there. You will be provided with
a list of materials that are suitable for this device.
– CLIP PROJECT can be downloaded at phoenixcontact.net/qr/5146053 .
– PROJECT complete can be downloaded at phoenixcontact.net/qr/1050453 .