Phoenix Contact THERMOFOX, User Manual

Page: 29 / 46

Operating elements
106986_en_01 PHOENIX CONTACT
29
4.1.5 Creating label modules with a fixed width
To label electronic modules, such as terminal blocks or fuses, one label can be
printed for all modules. A width (“Pitch”) can be determined for each module.
• Press the turquoise key.
• Select “4. Module” . Press the key.
• Select the required settings (see page 30).
• Press the key to select an entry. Go back with or key.
• „Mod“ appears on the screen.
• Use the arrow keys to select a module and add your marking. If you create
three module e.g. „Page01“, „Page02“, „Page03“.
• To leave the „Module“ template, press the green function key + .
If you select this template, the entered marking will be deleted. First create the
template and than enter the marking.
Example 1 F1
230 V
F2-4
400 V
F5
230 V
Total 1 2 3
Pitch + Factor 1 x
17.5 mm
3 x 17.5 mm 1 x
17.5 mm
SepLine Medium
Orient. Horizontal
Example 2
L1 L2 L3
N
Total 1 2 3 4
Pitch + Factor 1 x 8.5 mm
SepLine Thick
Orient. Vertical
Tem-
plate
Del./Back
Clear
Menu
F
Del./Back
Clear