Phoenix Contact RFC 4072S, User Manual, Page: 200 / 272

RFC 4072S
200 / 272
PHOENIX CONTACT 108580_en_02
9.5 Login
The WBM login page is displayed when
– You access WBM for the first time
– You have activated the WBM user authentication function, see Section 9.6.4.1 .
If you disable user authentication, logging in is not necessary to access WBM. In this case,
the WBM start page is displayed when WBM is accessed, see Section 9.6 .
Figure 9-4 WBM: Login page
Initial access as
administrator
When you access WBM for the first time, log in as the administrator.
• Enter the user name “admin” in the “Username” input field.
• Enter the administrator password in the “Password” input field.
The administrator password is printed on the controller (see Figure 2-32 on page 67 ).
• To open WBM, click on the “Login” button.
The WBM start page opens (see Section 9.6 ).
Recommended:
• Only use the administrator password for initial login.
• Once you have logged in successfully, change the administrator password to prevent
unauthorized administrator access (see Section 9.6.4.1 ).