Phoenix Contact ILC 330 Series, User Manual, Page: 30 / 96

ILC 330.../350...
30
PHOENIX CONTACT 6959_en_07
Figure 2-15 Removing the Inline controller
Replacing an Inline
controller
If you want to replace an Inline controller within an Inline station, proceed as described
above (removing and mounting). Make sure that the terminal to the right is not installed
when removing and mounting the Inline controller. Only reinstall this terminal once the Inline
controller is mounted.
Observe the following when replacing an Inline controller:
• If you want to use the parameterization settings and projects of the Inline controller to
be replaced, insert its parameterization memory into the new Inline controller.
• Enter the new MAC address when using the BootP server.
A
A1
A2
B
C1
C2
C
6959B010
Make sure that all featherkeys and keyways on adjacent terminals are securely
interlocked.