Phoenix Contact IB IL 24 PSDO 8-PAC, User Manual, Page: 87 / 112

Technical data and ordering data
7619_en_05 PHOENIX CONTACT
87 / 112
10.3 Conformance with EMC Directive
Safe digital outputs OUT0 to OUT3 (Fortsetzung)
WARNING: Loss of safety function
– Connect the ground of the actuator directly to the ground terminal point of the corresponding output on the
Inline plug. Use of an external ground is not permissible.
– The connected load must not respond in a hazardous way to test pulses.
Electrical isolation / Isolation of the voltage ranges
Separate potentials in the system consisting of bus coupler/power terminal and safety module
- Test distance - Test voltage
5 V supply of incoming remote bus / 7.5 V supply (bus logic) 500 V AC, 50 Hz, 1 min.
5 V supply of outgoing remote bus / 7.5 V supply (bus logic) 500 V AC, 50 Hz, 1 min.
7.5 V supply (bus logic) / 24 V supply U
M
, FE 500 V AC, 50 Hz, 1 min.
To provide electrical isolation between the logic level and the I/O area, it is necessary to supply the bus coupler
and this safety module from separate power supply units. Interconnection of the power supply units in the 24 V
area is not permitted. (See also user manual.)
Approvals
For the latest approvals, please visit phoenixcontact.net/products .
Conformance with EMC Directive 2014/30/EU
Noise immunity test according to DIN EN 61000-6-2
Electrostatic discharge (ESD) EN 61000-4-2
(IEC 61000-4-2)
Criterion B
6 kV contact discharge, 8 kV air discharge
Electromagnetic fields
EN 61000-4-3
(IEC 61000-4-3)
Criterion A, field strength 10 V/m
Fast transients (burst)
EN 61000-4-4
(IEC 61000-4-4)
Criterion B, test voltage 2 kV
Transient overvoltage (surge)
EN 61000-4-5
(IEC 61000-4-5)
Test intensity 2, Criterion B
DC supply lines:
0.5 kV/0.5 kV (symmetrical/asymmetrical)
Signal lines:
1.0 kV/2.0 kV (symmetrical/asymmetrical)
Conducted disturbance variables EN 61000-4-6
(IEC 61000-4-6)
Criterion A; test voltage: 10 V
Noise emission test according to DIN EN 61000-6-4
Noise emission EN 55011 Class A Industrial