Phoenix Contact IB IL 24 PSDO 8-PAC, User Manual, Page: 42 / 112

IB IL 24 PSDO 8-PAC
42 / 112
PHOENIX CONTACT 7619_en_05
SafetyBridge
Changing the setting:
1. Set Mode 2.
2. Set the SafetyBridge address specified in SAFECONF.
For more detailed information on the SafetyBridge address, please refer to the documenta-
tion for the logic module used (IB IL 24 LPSDO 8 V2-PAC or IB IL 24 LPSDO 8 V3-PAC).
SafetyBridge V3 switch
position
Table 4-3 Switch position for SafetyBridge V3
(IB IL 24 LPSDO 8 V3-PAC logic module used)
SafetyBridge V2 switch
position
Table 4-4 Switch position for SafetyBridge V2
(logic module used: IB IL 24 LPSDO 8 V2-PAC)
WARNING: Loss of safety function during mixed operation
During mixed operation between SafetyBridge V1 and/or SafetyBridge V2 with
SafetyBridge V3, incorrect addressing may lead to a loss of the safety function.
Take the following action:
• Make sure that the island number of the
SafetyBridge V3 s ystems ≥ 8 is on a controller.
Only use devices with a uniform transmission speed within an Inline station (a local bus).
It is not possible to operate a mixture of devices with different transmission speeds.
SafetyBridge V3
Mode switch Address switch
Island number Satellite number
9 8 7 6 5 4 3 2 1 0
Mode 2
1
dec
to 31
dec
1
dec
to 16
dec
SafetyBridge V2
Mode switch Address switch
Island number Satellite number
9 8 7 6 5 4 3 2 1 0
Mode 2 off off
1
dec
to 31
dec
1
dec
to 5
dec