Phoenix Contact IB IL 24 PSDO 8-PAC, User Manual, Page: 102 / 112

IB IL 24 PSDO 8-PAC
102 / 112
PHOENIX CONTACT 7619_en_05
D 2 Assembly and electrical installation
Checklist for assembly and electrical installation of the safety module
Device type / Equipment identification
Version: HW/FW/FW Date
Editor Test engineer
Comment
No
.
Requirement (mandatory) Yes Comment
1 Was assembly completed according to the specifications (specifications
from the planning phase or according to the user manual)?
2 Was the safety module installed in the control cabinet (IP54)?
3 Do the cable cross sections correspond to the specifications?
No
.
Requirement (optional) Yes No Comment
4 Is the transmission speed set correctly according to the specifications?
5 Is the data width set correctly according to the specifications?
6 Is the profile/PROFIsafe address set correctly according to the specifi-
cations?
Date Signature (editor)
Date Signature (test engineer)