FL NAT SMN 8TX(-M)
6-4
PHOENIX CONTACT
7966_en_04
6.3
Configuration of MRP
6.3.1
MRP General
The “MRP General” web page shows the current parameters set for using the protocol. The
following information is displayed:
–
Operating mode (Disabled or MRP Client)
–
License key (Present or Missing)
–
Topology modification counter
–
Time of last topology modification
–
Ring port numbers and status of the ports (Forwarding or Blocking)
Figure 6-4
“MRP General” web page for an MRP client
6.3.2
MRP Configuration
The “MRP Configuration” web page is used to configure the protocol parameters. The
following configuration parameters are displayed:
–
Device role (Disabled or MRP Client)
–
Selection of the ring ports that are integrated in the MRP ring
Figure 6-5
“MRP Configuration” web page
The switch with the current firmware can only be operated as an MRP client.
