Electrical installation
108928_en_02
PHOENIX CONTACT
33 / 84
5.4
Terminal points and associated spring lever
When using the screwdriver, pay attention to the position of the spring lever to the assigned
terminal point.
When testing the signal with a measuring probe, pay attention to the position of the touch
connection to the assigned terminal point.
Figure 5
-
2
Terminal point with associated spring lever, and associated touch
connection
1
Terminal point
2
Associated spring lever
3
Touch connection
A selection of appropriate test pins can be found in the UM EN AXL SE SYS INST user
manual or on the Internet at
2
3
1