Phoenix Contact 2313643, User Manual, Page: 75 / 94

Configuration via PSI-CONF
104273_en_01 PHOENIX CONTACT
75
6.5 Transfer
Figure 6-7 PSI-CONF: Transfer
Port A/B/Ethernet port
TX network load
Network load for outgoing data traffic
Port A/B
Link quality
Quality of the data link.
Port A/B/Ethernet port
Link status
Indicates the status of the connection
Port A/B/Ethernet port
Error diagnostics
Indicates how strongly data traffic is disturbed
Seconds since boot Time in seconds between the event and the time of the last
boot procedure
Diagnostics >> Value log
Transfer
Transfer configuration
from/to file
This function is only available in online mode.
There are two options:
1. You can open an existing file and save it to the Ethernet extender that is connected
via USB.
2. You can read the existing configuration and save it to a file.
The file extension is ".dat".