Phoenix Contact 1136419, User Manual, Page: 41 / 130

Description of the controller
110146_en_00 PHOENIX CONTACT
41 / 128
“FAN CONTROL” submenu
When operating the controller with a fan module:
You can view certain information about the fan module and calibrate the fan module via the
“FAN CONTROL DETAILS” menu.
Alternatively, you can calibrate the fan module via the controller WBM. Information on
calibrating the fan module is available in the PLCnext Info Center .
• Tap “FAN CONTROL”.
⇒ The “FAN CONTROL DETAILS” submenu opens.
Figure 4 - 21 “CONFIG DETAILS” menu, “MAINTENANCE” submenu, “FAN CONTROL
DETAILS” submenu
The following information on the fan module is displayed in the “FAN CONTROL DETAILS”
submenu:
– “Board Temp °C”:
Board temperature
– “Fan Defect”:
Information on whether there is a defect in the fan module.
Possible displays:
– “No”: There is no defect in the fan module.
– “Yes”: There is a defect in the fan module.
Information on the message “Fan Defect” is available in the PLCnext Info Center .
– “Fan Maintenance”:
Information on whether the fan module requires maintenance.
Possible displays:
– “No”: No maintenance of the fan module required.
– “Yes”: Maintenance of the fan module required.
Information on the message “Fan Maintenance” is available in the
PLCnext Info Center .
– “Speed Level”:
Current rotation speed of the fan module
– “Last Calibration”:
Date that fan calibration was last performed.
Calibrating the fan module Use the “Fan Calibration” button to initiate calibration of the fan module: