GB11
WelcomeEye Connect / Touch / 09/17
1. Visit memory function
a b c
a: Photo record of a visitor.
b: Video recording of a visitor (there must be a formatted micro SD card in the monitor).
c: Deactivation of the visit memory function.
2. Video recording confi guration (valid if video mode has been selected)
Choose the video recording time (10, 20 or 30 sec) during a missed call or in monitoring
mode (
note:
function inactive without a micro SD card).
3. Photo confi guration (valid if photo mode has been selected)
Choose the number of photos taken (1, 2 or 3) during a missed call or in monitoring mode.
4. De-activation of silent mode
This function turns off the monitor ringtone for a certain period (snooze, etc.). The monitor
LEDs will continue fl ashing to indicate a call.
a b c
a: activate (
On
) / deactivate (
Off
) the monitor’s
silent mode
.
b: Time when the ringtone will be deactivated.
c: Time when the ringtone will be reactivated.
5. Answering system function (only on WelcomeEye Connect, valid if video mode has been
selected)
This function allows you to record a voice message which will be played if the call is not
answered. Video recording must be confi gured during calls to activate this function.
a b c
a: To activate or deactivate voice message function.
b: To play back the recorded voice message.
c: To start and stop voice message recording (maximum duration of the message: 15s.).
Summary of Contents for WelcomeEye Connect DES9900VDP - 531002
Page 238: ...WelcomeEye Connect Touch 09 17 ...
Page 239: ...WelcomeEye Connect Touch 09 17 ...
