Philips WelcomeEye Connect DES9900VDP - 531002, User Manual

Page: 42 / 240

GB9
WelcomeEye Connect / Touch / 09/17
9 – Refi t the front cover of the intercom and tighten the tamper-resistant retaining screw.
10 - Connect the 230V AC power supply to the modular adaptor, for an installation compliant
with applicable standards (NFC 15-100 in France).
- Verify the smooth functioning (video call, RFID, etc.).
- When there is a second intercom panel, don’t forget to confi gure the monitor(s).
On
11 - Attach a silicone seal* between the shield and the wall to stop fl owing water.
*Do not use acetic acid-based silicone (vinegar odour).
5. Installing a camera (optional)
Connect the wires in accordance with the wiring diagram.
Choose a suitable place to install the camera.
Ensure that nothing gets in the way of the installation.
Screw the wall section with the screws provided (for solid walls).
Point the camera in the desired direction and tighten the retainer screw.
Confi gure the monitor(s)
On
6. MONITOR INTERFACE
Main Menu
Lightly touch the screen to turn it on and access the main menu
FULL
MEM.
22 4
23:59 01/07/2017
FULL
MEM.
A B C D E
A. Monitoring function and response to a call
B. Intercom function
C. Settings
D. Photo album
E. Video album
: indicates that silent mode is active
: indicates that the monitor ringtone is deactivated