25
EN
Lock keypad
Keypad can be locked to prevent accidental key press.
When the keypad is locked, you can still answer an incoming call by pressing
.
During the call, the keypad is active. When the call is ended, the keypad will be locked again.
1. In idle mode, long press
. When locked,
will appear on the display.
2. Press the
UNLOCK
key to unlock the keypad. Press
OK
to confirm.
Paging
You can locate the handsets by using this feature.
Press
on the base.
All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays
PAGING
.
To stop paging :
Press the
STOP
softkey or
on one of the handsets or press
on the base again.
CallerID first ring suppression
If you have subscribed for CallerID service, your phone will suppress the first ring before the CID. After
resetting, first ring suppression will be deactivated. After the first call, your phone will automatically detect if
CID service is subscribed. If CID service is detected, your phone will start suppressing the first ring after the
first call.
Switch on/off the handset
To switch off your phone, long press
while in idle mode.
To switch on the power of your phone, press
or return the handset to the charger.
The handset should be automatically turned on.
Note :
A handset will not play the paging melody if it is powered off or not in idle mode. However, all
the other handsets will still ring.
Note :
Once first ring suppression is activated, the first ring before CID will be suppressed even after
you have unsubscribed the CID service. If you have unsubscribed the CID service and do not wish to
have the first ring suppressed, please power recycle the base.
Other features
Summary of Contents for VOIP4331S/01
Page 1: ...User manual Charge the handset s for 24 hours before use ...
Page 2: ......
Page 44: ......
