Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care
Printed in the Netherlands
© Copyright reserved
Subject to modification
Vision
Vacuum
cleaner
HR 8910
PRODUCT INFORMATION
- Maximum air displacement
: 34 l/sec.
- Maximum vacuum water column
: 290 cm
- Power consumption (IEC)
: 1400W
- Dust storage capacity
: 4 litres
- Cord length
: 8.3 metres
- Filter system (depends on version) : Paper dustbag
: Exhaust S-air fi lter
: Active
carbon
protection
fi
lter
- Dimensions cleaner
: 48 x 30 x 25 cm
- Weight without accessories
: 6.4 kg
- Noise
: 78 dB
- Colour
: Blue / grey
OPTIONAL
Exhaust air fi lter - AFS
HR 6932 (8836 932 01210)
Oslo cotton dustbag
HR 6935 (8836 935 01010)
Oslo paper dustbag set
HR 6938 (8836 938 06110) economy
Oslo paper dustbag set
HR 6938 (8836 938 10110) hygiene
Oslo 3-M dustbag
HR 6938 (8836 938 91010)
Active carbon inlet fi lter
HR 6949 (8836 949 01010)
Active carbon fi lter set
HR 6968 (items 41 + 42)
S-class fi lter
HR 6992 (8836 992 01010)
S-class fi lter set
HR 6993 (items 48 + 49)
Polishing nozzle
HR 8040 (item 111)
Turbo brush
HR 6988 (item 114)
4322 277 00270
00/03
PCS 101 445
SERVICE INFORMATION
- The infrared remote control can adjust the suction power with
5 speeds. When switched on, the appliance always starts
with the highest power, even without a connected hose.
Use LR03 batteries. Alkaline is advised.
- To open the appliance, fi rst remove the panel (item 13) with a big
screw driver (V) to disconnect the 4 snap locks (the 4 screws of
button panel item 39 can be loosed) and then remove the two
pedals (items 1 and 14) with a pin (W), max. diameter 2.5 mm.
- Power meter (8838 000 60300) is a commercial item with a fi xed
air displacement which measures the vacuum of the appliance.
- Component confi guration on exploded view may differ in case
of specifi c versions. However, the actual components are
distinguished by means of code numbers.
- The spare parts have been standarized as much as possible.
- Item 7A. This appliance is provided with ring 7A. For other parts
use item 6 or 7.
- Item 16 Cotton dustbag is used in those countries where paper
dustbags are not available.
- Item 21 is provided with the long cord-winder spring; both long
and short cords can be used in combination with this spring.
- To disassemble the cordwinder use TORX screw driver no T15,
which is one of a set consisting of T20, T15, T10, T9, T8, T7 and
T6 = 4822 395 50145.
- Item 43 air valve opens to cool the motor if the air displacement is
too low or if the air fl ow is blocked.
- Cordwinder spring has to be tensioned till maximum minus
approx. 1,5 revolution.
This product meets the requirements regard-
ing interference suppression on radio and TV.
After the product has been repaired, it should
function properly and has to meet the safety
requirements as offi cially laid down at this
moment.
