4
EN
3 Get started
Charge your headphones
Note
•
Before you use your headphones for the first time,
charge the battery for 5 hours for optimum battery
capacity and lifetime.
•
Use only the original USB charging cable to avoid any
damage.
•
Finish your call before charging the headphones, as
connecting the headphones for charging will power the
headphones off.
•
You can operate the headphones normally during
charging.
Connect the supplied USB charging cable to:
• the micro USB charging slot on the
headphones and;
• the charger/USB port of a computer.
»
LED turns white during charging and
turns off when the headphones is fully
charged.
Tip
•
Normally, a full charge takes 2 hours.
Pair the headphones with
your mobile phone
Before you use the headphones with your
mobile phone for the first time, pair it with a
mobile phone. A successful pairing establishes a
unique encrypted link between the headphones
and mobile phone. The headphones store the
last 4 devices in the memory. If you try to pair
more than 4 devices, the earliest paired device
is replaced by the new one.
There are two ways to pair your headphones
with your mobile phone:
• Manual pairing
• NFC pairing
Manual pairing
1
Make sure that the headphones are fully
charged and turned off.
2
Press and hold the on/off button until the
blue and white LED flashes alternately.
»
The headphones remain in pairing
mode for 5 minutes.
3
Make sure that the mobile phone is turned
on and its Bluetooth feature is activated.
4
Pair the headphones with the mobile
phone. For detailed information, refer to
the user manual of your mobile phone.
NFC pairing
1
Make sure your headphones are turned on.
2
Make sure you turn on the NFC function
on your phone and your phone’s screen
remains active.
3
Place your phone over the headset so that
the NFC detection area of each device can
touch each other.
4
Pair the headphones with the mobile
phone. For detailed information, refer to
the user manual of your mobile phone.
Note
•
Make sure your mobile phone has the NFC feature
available and switched on.
•
Make sure your mobile phone is not in standby mode.
•
Pairing with NFC is only suitable for Android mobile
operating system 4.2 or above.
•
Refer to the user manual of your mobile phone to
identify its NFC detection area.
The following example shows you how to pair
the headphones with your mobile phone.
1
Activate the Bluetooth feature of your
mobile phone, select Philips TX2BT.
Summary of Contents for TX2BT
Page 2: ......
