Mechanical Instructions
4.
4.4
Model T296XW01V0 and T296XW01V3
4.4.1
Control Board
Disassembly
1.
Place the panel face down on the foam bars, and locate the
Control board.
Figure 4-17 Control board location
2.
Remove the four screws of the metal cover: start with the
right-down one, then the left-up, one, then the right-up one
and finally the left-down one.
Figure 4-18 Cover screws removal
3.
Lift the cover from the Control board.
Figure 4-19 Lift cover
4.
Carefully disconnect the flat cable/FPCs from their
connectors.
Figure 4-20 Unplug flat cable
Figure 4-21 Unplug FPCs
5.
You can now remove the Control Board.
Reassembly
To reassemble, perform all processes in reverse order.
Important: Be sure to insert the FPCs correctly: the (white) line
must be invisible when inserted correctly (see figure below).
Figure 4-22 Correct FPC insertion
H_16900_002.eps
110707
H_16900_003.eps
110707
H_16900_004.eps
110707
H_16900_021.eps
110707
H_16900_020.eps
110707
H_16900_007.eps
110707
