15
Press
BACK
to go back to the previous
screen.
Press
HOME
to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of the NP2500.
To cycle through the alphanumeric
characters that are available, press a button
repeatedly.
To delete the last character entry from the
display, press
CLEAR
.
To delete the whole last line entry
from the display, press and hold
CLEAR
.
The onscreen display guides you
through the process of connecting the
NP2500 to your home network and
the Internet. This section describes the
typical wireless setup with automatic
IP address. You can also follow the
onscreen prompts for advanced
configurations that are not described
in this manual.
Ensure that your network name and
network password or encryption key
are available.
1
Turn on your wireless access point or
wireless router with broadband Internet
access.
2
Follow the steps in chapter First-time
connection to home network (see ‘First-
time connection to home network’ on
) until the NP2500 shows the
prompt for the network setup.
3
Select
[Wireless (WiFi)]
to start the
network setup process.
The NP2500 searches for networks.
4
Select your network from the list of found
networks and confirm.
Enter the encryption key (if required)
and confirm.
•
•
•
•
•
•
•
»
•
A wireless access point or wireless
router with broadband Internet access
Manual entry of your encryption key
(for encrypted network connections
only)
First-time setup: Wireless network
connection with static IP address (see
‘First-time setup: Wireless connection with
static IP address’ on page
This setup requires the following:
A wireless access point or wireless
router with broadband Internet access
Manual entry of your IP address.
Manual entry of your encryption key
(for encrypted network connections
only)
First-time setup: Wired (Ethernet) network
connection with automatic IP address (see
‘First-time setup: Wired connection with
automatic IP address’ on page
)
This setup requires the following:
A wired access point or wired router
with broadband Internet access and a
free Ethernet port
An Ethernet cable (sold separately).
First-time setup: Wired (Ethernet) network
connection with static IP address (see
‘First-time setup: Wired connection with
static IP address’ on page
This setup requires the following:
A wired access point or wired router
with broadband Internet access and a
free Ethernet port
Manual entry of your IP address.
An Ethernet cable (sold separately).
First-time setup: Wireless connection
with automatic IP address
This is how to navigate and select with the
remote control:
Press or to select a menu option.
Press
OK
to confirm a selection.
»
»
•
»
»
»
»
•
»
»
»
•
»
»
»
»
•
•
First-time setup
En
gl
is
h
EN
