13
5 Turn On and
Switch to Active
standby / Eco
standby
You can select from the following status options:
On
(the full display and the remote control
are active, button LED is off)
Active standby
(the clock display and the
remote control are active, button LED is
red)
Eco standby
(the display and the remote
control are deactivated, button LED is off)
In status
On
or
Active standby
,
press the on the remote control to
toggle the NP2500 between
Active
standby
and
On
.
press and hold the on the NP2500 to
switch the NP2500 to
Eco standby
.
In status
Eco standby
,
press the button on the NP2500 or on
the remote control to turn the NP2500
On
.
Note
In stop (idle) mode, if no buttons are pressed for 20
minutes, the NP2500 switches to Active standby.
•
•
•
•
•
•
•
First-time setup
En
gl
is
h
EN
