Philips Streamium HK-1008-MCi900 2010, User Manual, Page: 60 / 108

60 EN
Device information
From the home screen, go to [Settings] >
[Device ID and information] You can learn
about information about MCi900, including
model number, name to be shown on a UPnP
server/client, software version and network
settings.
Check for software upgrades
On the MCi900, you can check for software
upgrades. After you click to agree to the terms
and conditions, the downloading and installation
of new upgrades start automatically.
1
Ensure that MCi900 is connected to the
Internet.
2
From Home screen, go to [Settings] >
[Check for software upgrades] .
Demo mode
After the first-time setup, you can view the
demo again.
1
From Home screen, go to
[Settings]
>
[Demo mode]
.
Demo play starts. »
2
To exit the demo play, press .
The unit is switched to Eco standby. »
Call center numbers
If you need help with the usage of MCi900, go
to
[Settings]
>
[Call centre numbers]
to check
the number of your nearest call center.
Device name
In [Device name] , you can name/rename your
MCi900. On a connected UPnP server/client,
the MCi900 can be found as named.
1
From Home screen, go to [Settings] >
[Network settings] > [Device name] .
2
In [Device name] , press / to select the
entry location; press / repeatedly to
select desired letters.
USB sharing
When you connect
MCi900
to home Wi-Fi/
wired network, the HDD connected to
MCi900
can work as a shared disk of the
network. Contents on the HDD can be played
or shared on computers or UPnP devices that
are also connected to the network.
To permit or prohibit the sharing, go •
to
[Settings]
>
[Network settings]
>
[USB sharing]
. Press
OK
to turn
on or off the sharing.
Location and time zone
After the first-time setup, you can change the
selected location and time zone when moving
to a new location or time zone.
According to the selected location and time
zone, MCi900 can
Set clock automatically over the •
Internet (see ‘Date and time’ on page
58);
Pre-load preset Internet radio
•
stations automatically.
Language
After the first-time setup, you can change the
language selection in
[Settings]
>
[Language]
.