Touchstrip
Use the buttons on
this touchstrip to
access a layout.
Power Button
Scroll Wheel
By pressing and
holding this scroll
wheel for 5 seconds
you enter the
System Settings.
Speaker
Remote Control buttons
Status Display
Getting Started Guide
You can find
more information
on getting the
iPronto up and running and using it:
•
In the
iPronto User Manual
that accompanies the iPronto.
•
In
iPronto Online Help
that you can access via the ‘User Manual’ link
in the iPronto Portal in layout 8.
•
At
http://www.pronto.philips.com
.
More Information
By tapping button 8
on the
touchstrip
you enter the
iPronto Portal.
View Control button
With the View Control button
you enter the Application
Settings.
Install the Wireless LAN Adapter
3
Put the Wireless LAN
Adapter in the correct
position until it clicks and
close
the cover.
Open
the Wireless LAN
Adapter cover by pushing
in the grips and sliding off
the cover in the indicated
direction.
Insert
the Wireless LAN
Adapter in the socket.
Open
the battery cover by pushing the grips
and sliding off the cover in the indicated
direction.
1
2
1
2
Recharge the Battery
Attach
the battery connector to the
provided socket.
Put the
right side
of the battery under
the provided hook.
Push the
left side
of the battery down into its place.
Close
the battery cover.
3
4
5
It is best to fully recharge the battery.
The iPronto can be used when it is recharging.
Note
Install the Battery
Lift
the stand.
3104 205 3288.2
iPronto QSG E v1_6.qxd 20-04-2004 14:07 Pagina 1
