measured water hardness is different, adjust the setting in the machine
menu.
1
Immerse the water hardness test strip (supplied with the machine) in tap
water for 1 second.
2
Remove the water hardness test strip and and wait for 1 minute.
3
Check how many squares have turned red and check the water hardness
in the table below.
number of red squares
value to be set
water hardness
1
very soft water
2
soft water
3
hard water
4
very hard water
4
Press the MENU button, select menu and scroll to select water hardness.
Select the preferred water hardness setting and press the OK button to
confirm.
Control panel and display
This espresso machine has a self-explaining display for easy use. Read the
sections below for a quick explanation of the buttons.
One-touch beverage buttons
Use the one-touch beverage buttons (ESPRESSO, COFFEE, CAFÉ AU LAIT,
CAPPUCCINO and LATTE MACCHIATO) to quickly prepare one of the preset
beverages.
- Make sure that the milk carafe is in place and prepared for use when you
select cappuccino or latte macchiato (see the separate quick start guide).
- Note: If you want to stop the brewing process before the machine has
finished dispensing the preset coffee volume, press the OK button or the
previously selected beverage button.
- You can adjust the volume of espresso or coffee.
- After preparing a milk-based beverage, the machine starts the QUICK
CARAFE CLEAN procedure.
Navigation buttons
Use the buttons described below to navigate through the menu:
Escape button: press this button
to return to the main menu.
Up button: press this button to
scroll up through the display
menu.
Ok button
:
press this button to
select, confirm or stop a function.
Down button: press this button to
scroll down through the display
menu.
9
English
