Brewing milk-based beverages
The milk carafe is used to froth milk and brew milk-based coffee beverages.
How to use the milk carafe
Note: Before first use, rinse the milk carafe as described in chapter
'Maintenance and care', section 'Cleaning the milk carafe'.
Caution: Steam and hot milk may spray out of the milk froth dispensing
spout at the start of the brewing cycle.
Caution: Make sure that the milk carafe is installed and the milk froth
dispensing spout is open before you select a milk-based coffee beverage
or milk froth.
1
1
2
If the hot water dispensing spout is installed, press the release buttons on
both sides of the hot water dispensing spout and remove it
.
Remove the milk carafe lid.
5ill the milk carafe with milk between the MIN and MAX level indications.
Note: Use cold milk at a temperature of approximately °C/ °5 with a
protein content of at least % to ensure an optimal frothing result. You
can use whole milk or semi-skimmed milk. It is also possible to use
skimmed milk, soy milk and lactose-free milk.
Slightly tilt the milk carafe and insert it into the guides of the machine.
Then push the bottom of the carafe towards the machine until it locks
onto the drip tray.
English
Summary of Contents for Saeco INCANTO HD8919
