Philips PS27FHDER, User Manual

Page: 17 / 40

4. Advanced operation
Info
Image
Settings
OSD Position
OSD Timeout
OSD Lock
Factory Reset
DVI1 5V
DVI2 5V
5V Output
Center
240 sec.
Off
Off
Off
Off
Image 4-7
4.7 OSD menu time-out
About the OSD menu time-out
By default, the OSD menu will disappear automatically after approximately 15 seconds of inactivity. This
time-out value can be adjusted to a maximum of approximately 4 minutes (240 sec.)
To adjust the OSD menu time-out value
1. Bring up the OSD main menu.
2. Navigate to the Settings > OSD Timeout menu.
3. Select one of the available time-out values.
Info
Image
Settings
OSD Position
OSD Timeout
OSD Lock
Factory Reset
DVI1 5V
DVI2 5V
5V Output
Center
240 sec.
Off
Off
Off
Off
Image 4-8
4.8 OSD lock
About the OSD lock
This setting allows you to prevent the access to the OSD and to the brightness control when enabled.
To fully lock/unlock the OSD
1. Bring up the OSD main menu.
2. Navigate to the Settings > OSD Lock menu.
3. Select On to enable or Off to disable the OSD lock.
K5902101 (451920611531) PS27FHDER 21/05/2015 15